Crown Plastics delivers innovative solutions using advanced polymers for markets that require:
- Abrasion resistance
- Non-stick friction reduction
- Scuff and impact resistance
- Noise reduction
Unique continuous high-temperature / high-pressure capabilities for processing thermoplastic resins and materials allows Crown Plastics to offer a wide range of material fabrication and converting options. As the world leader in the manufacturing of DuraSurf™ thin gauge UHMW polyethylene, Crown Solutions result in:
- Less material
- Less installation time
- Less downtime
- Less cost
Model 20 Endless Belt Press- 2 units
- Isochoric Pressure- 103 bar (1500psi)
- Belt Width- 558.8mm (22”)
- Maximum Product Thickness- 76mm (3”)
- Minimum Product Thickness- 0.1mm (.004”)
- Maximum Temperature- 400°C (752°F)
- Maximum Speed- 3m/min. (10 ft./min.)
- Belt Preheat Length- 304mm (12”)
- Heated length-228mm (9”)
- Cooling Length-228mm (9”)
- Equipment Location- USA
Model 32 Endless Belt Press- 1 unit
- Isochoric Pressure- 103 bar (1500psi)
- Belt Width- 914.4mm (36”)
- Maximum Product Thickness- 76mm (3”)
- Minimum Product Thickness- 0.1mm (.004”)
- Maximum Temperature- 400°C (752°F)
- Maximum Speed- 3m/min. (10 ft./min.)
- Belt Preheat Length- 304mm (12”)
- Heated length- 381mm (15”)
- Cooling Length- 533mm (21”)
- Equipment Location- USA
Model 60 Endless Belt Press- 1 unit
- Isochoric Pressure- 103 bar (1500psi)
- Belt Width- 1752.6mm (69”)
- Maximum Product Thickness- 76mm (3”)
- Minimum Product Thickness- 0.1mm (.004”)
- Maximum Temperature- 400°C (752°F)
- Maximum Speed- 3m/min. (10 ft./min.)
- Belt Preheat Length- 304mm (12”)
- Heated length- 228mm (9”)
- Cooling Length- 228mm (9”)
- Equipment Location- USA
Model 18 Endless Belt Press- 2 units
- Isochoric Pressure- 103 bar (1500psi)
- Belt Width- 508mm (20”)
- Maximum Product Thickness- 76mm (3”)
- Minimum Product Thickness- 0.1mm (.004”)
- Maximum Temperature- 400°C (752°F)
- Maximum Speed- 3m/min. (10 ft./min.)
- Belt Preheat Length-304mm (12”)
- Heated length-228.6mm (9”) up to 457.2mm (18”)
- Cooling Length–228.6mm (9”) up to 457.2mm (18”)
- Equipment Location- Xiamen, China
Product Types
- Sintered UHMW-PE sheet
- Debulking/ consolidating non-wovens
- Film and reinforcement laminations
- Powder spreading on reinforcement and consolidation
- Multilayer film laminations
- Encapsulation of metallic or ceramic elements
Other Processing Equipment
- Welex 2.5” extruder/ sheetline 30” wide for melt polymer sheet production. .010” to .100” thick.
- Ram Extrusion- 9.5mm-12mm thick/ 254mm wide for UHMW extrusion. 3 units USA, 2 units PRC
- Billet Compression molding press
- Wide Belt Sanding- 27” to 52” wide.
- Corona Treating- Up to 36” wide.
- Flame Treating- Up to 24” wide.
- Adhesive Lamination- Up to 36” wide.