The Easy-To-Apply Products
Crown Plastics wear strips are adhesive backed tapes that lower noise, increase belt lifespan and reduce energy demand. Each tape product offers the excellent abrasion resistance, low coefficient of friction, high impact strength and high performance people have come to expect from UHMW. By providing this exceptional material with an adhesive backing, installation time and costs are significantly reduced. No need for bolts or fasteners, no need to countersink.
DuraSurf™ ETA: Why use ETA instead of screwing down sheets of 1/4″ UHMW? ETA reduces material and cost by 75%! For example; when a standard 1/4″ thick sheet of UHMW is installed using the traditional mechanical fastening method, 3/16″ of the material is, for practical purposes, lost beneath the bolt head. This leaves only about 1/16″ usable wear surface above the bolt. When the material is worn to the bolt it will need to be replaced. You can achieve the same result with a 1/16″ DuraSurf™ ETA tape product and eliminate 80% of the time and cost associated with traditional installation methods. Crown Plastics offers a wide range of both rubber and acrylic based adhesive systems to meet virtually any application requirement.
AVAILABLE THICKNESS:
.003″ (.076 mm) .005″ (.127 mm), .010″ (.25 mm), .015″ (.38 mm), .020″ (.5 mm), .031″ (.78 mm), .040″ (1.02 mm), .062″ (1.57 mm), .080″ (2 mm) .093″ (2.36 mm), .125″ (3.17 mm)
AVAILABLE WIDTHS:
All dimensions between 1/4″ (6.35 mm) and 24″ (610 mm)